Bay Equipment

Handheld Core Drill Rental

Description

A hand held core drill puts a clean round hole through masonry or block without a rig, a stand or an anchor. If the hole is four or five inches and the wall is reachable, this is the tool: you hold it, you drill it, you are done.

Hand Held or a Rig

The question worth answering before you book. A hand held core drill suits holes up to about 5 inches, in block and masonry, and anywhere setting a rig would take longer than the hole itself. Take the rig instead for reinforced concrete, anything over 5 inches, deep cores, or a run of holes that all have to line up.

What It Gets Used For
  • 4 and 5 inch penetrations through block and masonry walls
  • Dryer, dust and vent penetrations
  • Conduit and pipe through non structural walls
  • One-off holes where a rig is not worth setting
Features
  • Up to 5 in Bits: Designed for diamond core bits to 5 inch diameter
  • Variable Speed Control: The correct speed for the bit gives the best results
  • Wet or Dry: Water supply provided, works with wet and dry core bits
  • Safety Features: Built-in clutch and overload protection
Related
  • Core Drill Rental, the rig, for holes to 12 inch and for reinforced concrete
  • Wet and Dry Diamond Core Bit Rental
  • Core drill stand attachment

Pickup and Delivery Services

Bay Equipment Co offers pickup and delivery services for all of our rental offerings in the Hampton Roads and Richmond areas at very competitive prices.

Hauling fees vary by distance from the nearest store, required tolls, and whether or not the load is trailered.

Credit Card Rentals

Bay Equipment Co requires a major credit card for all rentals not on a house credit account. Debit cards are not accepted for rentals. Renters must also provide a current drivers license.

The estimated rental fee will be calculated and pre-charged to the credit card for up to a 28 day rental cycle.

Renter agrees that Bay Equipment Co can charge the credit card used to secure the rental for any and all incidentals, including but not limited to fuel, delivery fees, and damage charges.

Rental Fees and Terms and Conditions

Rental fees are calculated based on daily, weekly, and 28 day billing cycles.

Weekend rentals are considered one day for billing purposes unless the equipment is hourmeter-equipped and the usage exceeds eight hours.

A very limited amount of equipment, including scaffolding, is only rented on a 28 day cycle.

Customer will be billed for fuel usage unless the equipment is returned full.

Equipment damage will be billed to the customer.

Our standard rental contract terms and conditions can be found here.

Images and specifications of rental items are for estimation only and may not reflect the actual make and model of the available equipment.

Back to top